Routers: Router Bits | Power Tools and Accessories | MAP Fittings

Routers: Router Bits - Power Tools and Accessories

Arbour, Ø 1/4" shank

• Standard duty arbour with 1/4” spindle and spacers
• Enables the mounting of 1/4” bore slotters with and without bearings in a variety of positions
• Solid tungsten carbi[...]

Trade Price: £24.00
MAP Price (Inc VAT):
£19.02

Bearing ring

• For use with rebaters
• Give various rebate sizes
• Rings are secured between the two bearings
• MetalView Technical illustration[...]

Trade Price: £7.20
MAP Price (Inc VAT):
£5.76

Bearing, Ø 8 mm shaft

• Shaft Ø: 8 mm
• Overall Ø: 12.7 mm
• For use with router bits shown in Related Products

Trade Price: £43.00
MAP Price (Inc VAT):
£34.56

Bearing, 1/4" shaft

• Shaft Ø: 1/4”
• 4 mm depth
• For use with arbour 002.19.220
• MetalView Technical illustration[...]

Trade Price: £15.00
MAP Price (Inc VAT):
£11.65

Bevel cutter, HW tipped, with ball-bearing guide, Ø 8/12 mm shank

• Shaft Ø: 8 mm or 12 mm
• Tip material: HW (formerly HM)
• For a rounded bevel use in combination with rounding-bevel cutter

Trade Price: £90.00
MAP Price (Inc VAT):
£72.29

Bevel cutters, Ø 1/2" shank

• Shaft Ø: 1/2”
• For bevelling thick timbers
• Can be used for jointing, boxes, pilasters and carcassing
• Solid tungsten carbideView Technical illustration[...]

Trade Price: £114.00
MAP Price (Inc VAT):
£91.40

Bore slotters, Ø 1/4" bore

• TCT slotter with 1/4” bore
• To be used with arbour 002.19.220
• Kerfs are available from 1.5 to 5 mm
• Solid tungsten carbideView Technical illustration[...]

Trade Price: £48.00
MAP Price (Inc VAT):
£38.04

Chamfer V groove, Ø 1/4" shank

• For veining, panelling, V grooving bevelling and chamfering
• Shaft Ø: 1/4 inch
• Tip material: Tungsten carbide

Trade Price: £44.00
MAP Price (Inc VAT):
£34.95

Combination trimmer, Ø 1/4" shank

• Shaft Ø: 1/4”
• Self guided
• 90º trim is obtained by engaging the bottom half and a 45º trim by lowering the cutter
• A fine height adjuster is recommended[...]

Trade Price: £74.00
MAP Price (Inc VAT):
£58.83

Cutter for handle recesses, Ø 8 mm shank

• For cutting handle recesses straight through or for 1:1 copying with a handle template
• Easy to plunge into solid material
• Rip free through drilling
• Shaft: Ø 8 mm̶[...]

Trade Price: £187.00
MAP Price (Inc VAT):
£149.30

Disc groove cutter, Ø 8 mm shank

• For cutting grooves
• Shaft Ø: 8 mm
• Groove: 8 mm
• Tip material: HW (formerly HM)
• Without routing spindle, routing spindle must be ordered separately, please see b[...]

Trade Price: £50.00
MAP Price (Inc VAT):
£39.66

Draining board cutter, Ø 1/2" shank

• For routing sloping drainage grooves in a natural wood or wood based worktop
• Shaft Ø: 1/2” / 12.7 mm
• Use with sloping drainer routing jig (002.21.501), shown in Relate[...]

Trade Price: £48.00
MAP Price (Inc VAT):
£38.04

Last Page | Next Page